Sniffer for ZB-Connection networks
 |
Z-Config allows you to view in graphic form the quality of radio connections between routers that make up the network. The program works in conjunction with a specific USB device which constitutes the interface between program and devices that form the radio network.
|
With information obtained in graphic form by Z-Config you can identify weakness in the network, therefore it represents a useful tool in the test phase of the installation.
Key features
|
- Non-invasive ZB-Connection network analysis
- Works with specific USB device
- Detections of weaknesses in the network infrastructure
|
Technical Specs
| Required operating systems |
Microsoft Windows XP, Vista |
| Framework |
DotNet Framework 2.0 |
| System requirement |
Pentium 133 MHz or faster
256 MB or higher
Video: 800 x 600, 256 colors; recommended: High Color 16-bit
10 GB hard disk space |
| General characteristics |
Chip Ember EM2420
Compatible IEEE 802.15.4
Stack EmberZnet 3.5.x (ZigBee PRO)
Modbus/RTU |
| RF characteristics |
Frequency: 2405 MHz ÷ 2480 MHz
Modulation: DSSS
Nominal transmission power: 1mW (0 dBm)
Reception sensitivity: -92 dBm
Extern antenna Gain: 5,5 dB
Coverage outdoor/indoor: 100m/30m |
| Power supply |
+5Vdc from USB; 100mA |
| Connections |
USB 2.0 |
| Environment parameters |
Operating temperature: -10ºC ÷ +60ºC; <80% U.R. not condensing
Storage temperature: -20ºC ÷ +70ºC; <80% U.R. not condensing
Degree of protection: IP 50 |
| Approvals |
ETSI EN 300 328: Radio Compatibility for digitals wide band transmissions
ETSI EN 301 489: Radio Compatibility
EN 61000-6-2: Electromagnetic Compatibility - Emissions
EN 61000-6-3: Electromagnetic Compatibility - Immunity
EN 60950-1: Electric Safety |
|
ZB-Connection 
