 |
FALCOM STEPPIII - Complete Quad Band GSM/GPRS/GPS terminal with embedded 3D moving sensor, and embedded configurable mobile client application. RoHS compliant. The delivery set includes mounting cradle with mounting screws, system connector with 16 pin 1,5m long cable set with fuse protection for automotive installation. |
STEPP III is a free configurable smart tracking device, which can be fully adapted to user requirements. Its main purpose is to act as a mobile client for various system solutions like AVL, fleet management, vehicle security and recovery. The device can operate fully autonomous and is able to interact using sensors and actors.
It can be adapted to existing tracking solutions and can be easily configured to gather or exchange relevant information with servers or users directly. An often used example is to send status reports or verbose alert messages directly via SMS to users and/or via TCP to tracking servers.
Users benefit most from combining comfort and security aspects – for example having regular voice calls as well as spy calls in emergency cases. Drivers logbook and data logging functionalities are combined in the Falcom history feature.
Geofencing can be used to report violations of predefined routes or areas (for example if a car enters or leaves a specific area/ no-go-zones).
All of these features are perfectly integrated in a device concept, which significantly reduces time-to-market and provides low cost tracking and security solutions. |
|
Features
20 Channels of GPS SiRF GSC3/eLP
|
| Quad Modem GSM / GPRS Class 10 |
| Working temperature range of -40 º to 85 º |
| Motion in three axes |
| 2 serial ports |
|
4 Analog inputs, 2 inputs and 4 digital outputs
|
|
Application integrated AVL / installable (Firmware 2.5 and later) with total control over its operation, configuration, parameterization and allowing plenty of ways of working
|
|
History up to 300,000 positions
|
|
Messages telemetry and location on demand and / or shipments scheduled
|
| Geographic Alarms parameterization |
|
Configurable sleep mode
|
|
Remote communication by voice, SMS, CSD and GPRS (TCP connection to server)
|
|
V24 to RS232 serial interface for direct connection to PC
|
|
Configuration and firmware update and / or remote (OTA)
|
|
Meets specifications FTA, FCC, E1, EC
|
| Interfaces, components and installation designed for use in automotive |
Options
|
Internal battery Lithium Polymer: B1 / B2
 |
Stepp III may incorporate an internal battery for two different types: B1 (300 mAh) and B2 (1250 mAh). The device incorporates the necessary hardware to manage load and use, and is fully configurable.
The battery option allows the device to operate extra hours in case you do not receive principal food. Although reducing the temperature range of work that can operate, it is recommended for applications where security or the device can not be connected to a constant power supply.
|
CAN bus interface with high and low speed: CA / CH
Stepp III can be supplied (upon request) with a CAN interface which supports both the CAN-Bus high as the low speed
Choice (AC) Low-Speed CAN-Bus controller CAN1 (Type TJA1054A) is for use in passenger cars:
-
Compatible with ISO 11898-3 (CAN fail (low speed))
-
SAE J2411 Single-Wire CAN (SWC)
-
Supports up to 125 kbps baudrate
Option (CH) High-Speed CAN-Bus controller CANH (Type TLE6250) is for use in trucks:
Using the appropriate commands PFAL, STEPPIII devices can be used in applications compatible with CAN-Bus, as it is possible to define a communication baudrate CAN identifiers and filter to extract specific data it provides. The firmware of the devices STEPPIII / FOX can store up to 10 securities and send CAN-Bus via TCP to change the status of them.
 |
Nomenclature:
|
| STEPP III + < - / B1 / B2 > + < - / CA / CH > |
Examples:
|
|
Stepped III B2 CA - 1250 mAh battery and Can-BUS Low-Speed
|
| STEPP III CH - Can-BUS High Speed |
|
Stepped III - No options added
|
| Stepped III B1 - Battery 300 mAh |
|
Location Systems 
