Bolero LT
banner_flash_bolero-lt_01-small
Compact AVL GPRS-GPS terminal. GPRS class 10 modem plus 20 channel GPS receiver. Integrated antennas and serial port for configuration and peripheral operation. Complete fleet management and AVL firmware.

Bolero LT

Bolero LT

 

Bolero LT is a free configurable smart tracking device, which can be fully adapted to user requirements. Its main purpose is to act as a mobile client for various system solutions like AVL, fleet management, vehicle security and recovery. The device can operate fully autonomous and is able to interact using sensors and actors.

It can be adapted to existing tracking solutions and can be easily configured to gather or exchange relevant information with servers or users directly. An often used example is to send status reports or verbose alert messages directly via SMS to users and/or via TCP to tracking servers.

Users benefit most from combining comfort and security aspects – for example having regular voice calls as well as spy calls in emergency cases. Drivers logbook and data logging functionalities are combined in the FALCOM history feature. Geofencing can be used to report violations of predefined routes or areas (for example if a car enters or leaves a specific area/ no-go-zones).

All of these features are perfectly integrated in a device concept, which significantly reduces time-to-market and provides low cost tracking and security solutions.

gps2_sc


Features

GSM/GPRS TELIT GE864-Quad module
850/900/1800/1900 MHz
GPRS class 10, class B
TCP/IP (accessible via PFAL commands)
GPS FALCOM 20 channel GPS receiver
High sensivity SiRFStarIII chipset
Protocols: NMEA, GGA, GGL, GSA, GSV, RMC, WGS-84
Position accuracy: < 10 m CEP without SA
TTFF hot start: < 1 s average
TTFF cold start: < 42 s average
Tracking sensitivity: -159 dBm (13 dBHz)
Processor Core
ARM7/TDMI
Memory: 2 MB / 512 kB
Electrical Features +10,8 V to +35 V DC
Physical Features Dimensions (L x W x H): 85 x 56 x 20 mm
Weight: approx. 90 g
Temperature range** Storage: -40 °C to +90 °C
Operating: -40 ° to +85 °C
GSM: -30 °C to +80 °C
Battery option: -20 °C to +60 °C
Charging: 0 ° to +45 °C
Discharging: -20 ° to +60 °C
Interfaces 2 IOs
1 configurable input (digital or analogue)
1 digital output
RS232 (RX, TX V24 level)
SIM card reader for 1,8/3 V SIM cards
3 programmable LEDs
1 programmable button

 


Options

IP65 plastic cover: WP
Protective plastic that surrounds the device and provides protection against water and dust to IP65 standard.

 

Internal Lithium Polymer battery: B1
battery
Bolero LT may incorporate a battery of 300 mAh. The device incorporates the necessary hardware to manage load and use, and is fully configurable.

The battery option allows the device to operate extra hours in case you do not receive principal food. Although reducing the temperature range of work that can operate, it is recommended for applications where security or the device can not be connected to a constant power supply.

Motion in three axes: MS

 

An accelerometer can detect movement in any direction, useful for optimizing the management of low-power modes to provide a clear reference to whether there is movement or not.

 

Wireless IEEE 802.15.4: IE
network_wireless
Data bus for connecting peripherals such as wireless KeyFob, which provides an interactive mode with the remote control device with configurable functionality, or IEEE BOX, an area with 5 digital inputs, 2 analog and 4 digital outputs.

Nomenclature:

Bolero LT < - / WS > + < - / B1 > + < - / MS > + < - / IE >

Examples:

Bolero LT B1 WAS MS IE - Bolero LT with all options included
MS Bolero LT B1 - With battery and motion sensor
Bolero LT - No options added
Bolero LT WAS MS IE - with a case, motion sensor and connectivity IEEE 802.15.4

folder_downloads64

Downloads